The trouble with many motherboards of computers is having or showing CMOS error whenever you switch on your PC. It is frustrating when you know your PC is less than a year old and already having that problem.
Manufacturers of motherboards, especially those made in China, have that problem. Usually it should just be updating the BIOS and everything should be alright. But, no, it's not that way anymore. The problem could either be the 'botherboard' needs exactly the 3-volts of the CMOS battery and no less, or, the CMOS battery provides less than 3 volts.
It happened to an EMAXX motherboard and I thought replacing the CMOS battery solved it. The solution was only good for one day. It was the same thing on the second day showing CMOS error but there was actually none. The earlier errors before replacement was the date and time. Now there are no actual errors. Just press on F10 and all is good.
The issue is, if the AVR is turned off, it seems the CMOS battery no longer does the job it needs to do. It does not save the basic info it needs to start the CPU normally. So, if you do not want to getting into BIOS every start up, leave the AVR on. That will save precious minutes of going over BIOS and starting the computer.
How to Start Your Own Car Repair Shop -
A good business to start with minimal capital is an auto body repair and repainting shop. What is important here is good knowledge with some hands-on experience. A market start-up for the business will be like family, friends or associates, especially if exceptional jobs on their cars are done.
Word-of-mouth marketing is an essential part of this business to be successful. Tie-ups with car body part and paint material suppliers will also be a good strategy to gain more customers.
The War Commander game at Facebook has earned a big number of enthusiasts. The enthusiasm though is lost for some because of hours of repair time on damaged units. To make instant repairs it will cost money or Facebook credits and many would not want to spend money on playing war games like War Commander.
There is a little trick to shorten the repair time of damaged units. When repair time is less than 5 minutes, repair is free and instant. Riflemen and heavy gunners could be repaired instantly in groups of five or more. A pair Rocket Launcher and Flamethrower can likewise be instantly repaired. Others will take 6 to 9 minutes individually to repair and all you have to do is wait until the last 5 minutes to instantly repair them.
What you need to do is set up a platoon and name it "Repairs". Put in units one at a time that require repair time of less than 5 minutes to repair to make it instant. Move damage units to the barracks so you can proceed repairing them one after another. It takes almost or much less than half the time of standard platoon repairs at no cost at all. You will tend to like War Commander more because you actively participate in quick repairs of units.
Many CPU or computer desktop problems can be fixed by simple re-seating and changing of slots. Most motherboards will have 2 to 4 slots for its RAM. Same is true for GPU or video card PCI-e slots. Some problems that can be fixed are like:
- Monitor suddenly does not have any display.
- CPU starts then shuts down or restarts after being used for a short while.
- CPU starts but does not show to boot and monitor does not have any display.
- CPU shows error or BSOD shows or freezes on boot up.
When the above happens, re-seat the RAM card. If you have two RAMS or more in each slot and re-seating does not solve the problem, try taking out each card one at a time, then start the CPU each time until you take out all RAM cards. If it still does not work, insert only one card then start the CPU. Do this for each slot. You should be able to find out now which slots are not recognized by the system causing the defect.
If it is not the RAM cards, re-seat the GPU or video graphics card. If it still does not work, test the graphics card on a different CPU compatible with it. You should be able to tell then if it is the graphics card that is at fault or not.
Lastly, check the heat sink and fan of the processor. Chances are dirt and dust have accumulated causing the processor to overheat. Follow instructions from the manual on how to properly remove the fan and/or heat sink. To clean the assembly, use a soft bristle paint brush to get rid of the dirt. If the processor is exposed as with AMD processors, you should be able to see if silicon paste needs to be added for better cooling.
Take time also to inspect the PSU for dirt accumulation. It will also need to be cleaned gently with a paint brush. Take extra precaution in cleaning as some parts of the PSU still hold some high voltage that could give an unpleasant shock or even a bad burn.
I am currently handling and maintaining 12 desktops and 2 laptops at our internet shop and the above were the frequent problems and solutions.
Processors and heat sink fans will always need to have Silicon paste applied in between them when being installed. After dis-assembly for cleaning, you will find the paste between to have hardened and have breaks, some stay on the processor and others stick to the heat sink. These will have to removed and the surfaces cleaned well with a cotton bud dipped in rubbing alcohol.
When Silicon paste is not applied during re-assembly, chances are the computer will turn off on its own in a short while. This is because the processor has heated up and can not be cooled down by the heat sink fan.
In applying Silicon paste, it should be well spread out evenly on the surface of the processor. About a millimeter thin film of the paste should do the work to help the heat sink cool down the processor. While too much paste can drip down the processor and could ruin some of parts of the computer motherboard.
Almost all, if not all, late model printer cartridges have the print heads and contacts integrated in them. So, if you replace an empty cartridge not only do you get a new fully inked one with a new set of contacts and print head. Unlike earlier models, the printer heads were part of the printer assembly and not in the cartridges themselves. Once worn out, most of the time the print head could not be replaced.
With the printer cartridges now, especially those that can be or are being refilled, it is frequent that the printer would show an error that the cartridge is not being recognized or improperly installed. What actually happens is that the contacts are not clean or even smudged by ink. The reason why the printer could not recognize it.
It would be good to try, as remedy, to clean the contacts at the cartridge with cotton by softly wiping it. If the contacts seem dull or have a film over them, use a pencil eraser to clean the contacts much like erasing pencil writing. It often works because contact surface is renewed and can be detected by the printer. This will save a lot of money instead of buying a new printer cartridge.
The usual tool in mind to loosen the bolt of a crankshaft pulley is an impact wrench. Many though have not been successful in using them. There are other methods that can be used to loosen a crankshaft pulley bolt.
One quick way to do it is fit in a socket or box wrench (usually 19mm size) and let the other end rest against something fixed and sturdy where the engine would rotate. The starter then could be 'flicked' several times until the bolt loosens up. Before flicking the starter make sure that the high tension wire to the distributor is removed so the engine will not run.
When doing this method, make sure no one is around or near where the crankshaft pulley is. There is a tendency for the wrench to fly-off when the crankshaft pulley bolt comes loose.
Fibromyalgia never came to me as disease I had for more than 30 years now. All the while, I also never thought that I was fighting it that made me overcome the feeling of fatigue when I wake up and the entire body pain that I was experiencing in the early stages of it. Often on days I wake up and feel that way, I suspect that I am about to have flu or had one drink too many the previous night.
What was I doing to overcome body pains and the feeling of fatigue? Here is how to:
- When I wake up with that feeling, I force myself out of bed, have a cup of coffee then find something to get busy with.
- Physical activity makes the pain and feeling of fatigue go away.
- I do not take pain killers.
- When walking, especially uphill, to avoid pain in the knee and feeling of having cramps on both legs, I rest every 200 meters or less.
- I have made longer strides when I walk instead of my usual and normal short steps.
- I do not lie down to rest during daytime for more than an hour as it triggers the feeling of fatigue.
Now that I am aware that it is Fibromyalgia that has been causing me this odd feeling, I will no longer wonder why I frequently feel that way. With my age at 58 and getting older, I should be more physically active as fatigue and body pains get lost with the activity.
Unknown cause of disease and no cure: Fibromyalgia
Your computer has been working good and connected to the internet for as long as you know you have been using it. But suddenly, one day, when you switch it on it shows you have no internet connection. What needs to be checked are:
- Your cable or wifi connection
- Verify with your ISP if there's anything wrong with their service
- Check on your network adapter for any flaws
Most likely when you try to establish internet connection through the network it would not go through because of missing requirements. You find this impossible because you are aware that it was working fine and now this! No matter how often you try to install the the network adapter and try several drivers for it, it simply would not work.
That's what exactly happened to one of my CPUs in our network. I almost concluded that it was a motherboard issue. After some thorough research, I found out that there is a reset button or hole near where the headset is being plugged at the rear of the casing! (Most desktops would have and some might not) All that needs to be done is switch off the CPU, unplug the power cord then press the button for a couple of seconds. After that, plug in the CPU and switch it on. It should have the internet connection again. (TIP: If there is a small hole for the reset, use a paper clip to be inserted in the hole to press on reset.
Another possible cause would be the CMOS is corrupted and needs to be reset. If clearing and resetting does not do the job, check on the CMOS battery, chances are it is already drained and will have to be replaced. Symptoms of a CMOS battery going bad is the CPU time always resets to default whenever the computer is turned on.
Times come when you need to level a pool table, a stove or anything that needs to be leveled. They seem to look awkward when tilted to one side. It is irritating to see it is obvious for liquid to flow to just one side or higher on one side in a glass or container.
To make surfaces or things sit squarely flat horizontally, a carpenter's leveling tool is used for that. It is not common household tool so chances are you would not have one at home. How to make a home made temporary one is really easy. Take a glass or plastic jar with a cap. Draw a line about an inch high from the bottom around the jar. Put water in the jar up to the line you have drawn.
By setting the jar in the middle what you want to level, you will see what side needs to be elevated. The lower side will show water in the jar to be higher than the line. That should solve your problem on a surface that needs to be leveled.
Cars that have their headlight switch on the same lever as the turn signal switch become loose as they become old. In this situation, you could accidentally switch off your headlights at night when signalling left or right turn. Replacing the entire headlight turn signal switch assembly could cost anywhere from $50.00 and above, depending on the car make.
To avoid those costs, I fixed a thin strip of stainless steel at the non-rotating part of the lever extending about half an inch above the rotating switch. On the rotating switch, I formed a flattened sheet that holds umbrella wire frames into a ribbed aluminum band and used superglue to bond it. With that, the headlight switch fix now turns accordingly as it used to switch on the headlights.
Manufacturers of motherboards, especially those made in China, have that problem. Usually it should just be updating the BIOS and everything should be alright. But, no, it's not that way anymore. The problem could either be the 'botherboard' needs exactly the 3-volts of the CMOS battery and no less, or, the CMOS battery provides less than 3 volts.
